2013 STEPHEN JAY’S 3HAL FLOAT – AUSTRALIAN MADE
$22,000 AUD — NSW
| Price | $22,000 AUD |
|---|---|
| Location | Kurnell, NSW |
Quality Australian-made Stephen Jay’s triple angle-load horse float. A very solid, spacious float with good headroom. Adjustable dividers, well suited to larger horses. We have comfortably travelled our 16hh Clydesdale cross, 14.3hh Arabian gelding along with a friend's 15.2hh Friesian gelding together on many long trips, so this is a genuinely roomy three-horse float.
FEATURES
• Triple angle-load configuration with adjustable stallion dividers
• Good headroom for larger horses
• Aluminium floor with cross-members approximately every 400 mm
• Fixed, one-piece 10 mm heavy-duty non-slip rubber flooring
• Rubber on kickboards
• Heavy-duty Roller Rocker suspension
• Breakaway brake safety system
• 5 x Kumho light-truck tyres, fitted new in 2022 and very little use since
• Tailgate timber and gas struts replaced in 2025
• Rear storm door, lockable
• Fully lockable float
• Caravan-style side access door
• Fiamma roll-out awning
• Swing-out tack box with 3 saddle racks and multiple bridle hooks, lockable
• Large overhead front storage
• Wire rug rack, lockable
• 80 L water tank (water pump currently not working and requires attention)
• 12 V outlet suitable for camping fridge etc.
• Internal front tie-down points for securing fridge, feed bins, hay bales etc.
• 3500 kg GVM
• NSW registered until 24 January 2027
CONDITION
Very solid and in good overall condition for a 2013 float. Tows beautifully whether empty or with 3 horses onboard. Selling due as we're down to one riding horse now and don't really ride off the property these days.
It has been stored outdoors and consequently has some minor surface rust/touch-ups in places. There is a small crack at the front roof area, a chip out of the overhead cupboard door and some cosmetic damage to the spare-wheel rim from an old encounter with a bridge. The 80 L water tank is fitted, but the pump is currently not operating and needs attention.The original compliance plate has been a bit chewed up on one side by the jockey wheel but is still attached and the important identifying information, including VIN and ATM, remains clearly visible. The float is priced accordingly.
